User`s manual

7-3
Setting Examples Using the Set Wizard
7
(7) Select color image processing mode
Move the cursor to " EXTRACT COLOR" and
press the SET key.
Next move the cursor to "COLOR EXTRACT
SET" using the up and down arrow keys and
press the SET key. Select "DETAIL" to enter the
"SET EXTRACT COLOR" screen.
EXTRACT COLOR NO.
Enter the register number of the extracted color
that is used for measurement (enter 0 in this
example). Eight colors from 0 to 7 can be
registered as reference colors. These can be
used for each measurement, independently.
COLOR EXTRACTION AREA
Select " COLOR EXTRACTION AREA" using
the up and down arrow keys, and press the SET
key to enter the setting screen.
1. Press the SEL key to move the cursor to the
"F" (freeze image) that is at upper right of the
screen. Press the up and down arrow keys to
change from "F" to "T" (through image). The
image of Camera 1 changes to through image
and current image through the camera is
displayed on the monitor.
2. Adjust focus and aperture of the camera lens
to make clear the image of the object to
measure.
3. After the image is adjusted to clear, change
the image from "T" to "F" using the up and
down arrow keys. By changing the image from
"T" to "F," the IV-C35M stores the image.
4. Move the coordinate of " UP.L" and
" LO.R" to determine position and size of the color extraction area, and press the SET key.
(In this example, extract blue color.)
Note: If you want to move the color extraction area without changing shape and size, select
" MOVE."
STEP4
SELECT A COLOR IMAGE
PROCESSING MODE
1 COLOR FILTER □
2
EXTRACT COLOR ■
COLOR EXTRACT SET
DETAIL
SELECT A MEASUREMENT TYPE
1 MEAS SEL NO
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
1
EXTRACT COLOR NO 0(0∼7)
2
COLOR EXTRACTION AREA SET (277,232)∼(292,247)
3
FINE ADJUSTMENT ( TO NEXT SUB-MENU )
HUE (START PNT080 END PNT060)
CHROMA (U.LM130 L.LM110)
BRIGHT LEV (U.LM130 L.LM110)
COLOR F C1 BRTSET EXTRACT COLOR SCREEN COND SAVE
1
UP. L (248,232)
2
LO. R (263,247)
3
MOVE
4
REG
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT
RECTANGLE RESET RETURN
X:248 Y:232