User`s manual
6-15
Setting and Operating Outlines
6
6-8 Option
With the IV-C35M, you can initialize the measurement settings, and run a self-diagnosis from the option
menu.
Setting method
Display the "OPTION" from the "MAIN MENU."
Select the operation you want, such as
" INITIALIZATION" or " SELF-DIAGNOSIS."
INITIALIZATION
Select "ALL-INT" or "INT-RAM" and the following message will appear.
MEM. INIT.? (YES=[SET], NO=[ESC])
Press the SET key to start the initialization. The bar shown below will appear and display the progress
of the initialization.
After the initialization is complete, the word "INITIALIZING" will change to "COMPLETE INIT." Press
the ESC key to return to "MAIN MENU."
SELF DIAGNOSIS
Select " SELF DIAGNOSIS" and press the SET
key twice. The controller will execute a self-
diagnosis and display the results of the diagnosis,
as shown right. If the diagnosis results are normal,
"OK" will be displayed. If the results are abnormal,
"NO" will be displayed.
When the diagnosis is complete, the "DIAGNOSING"
display will change to "COMPLETE DIAGNOSIS."
Press ESC key to return to the "MAIN MENU."
REFERENCE IMG
SYSTEM I/O
OBJECT TYPE COND
INITIALIZATION
■■
■
■■■■■■■□□□
COLOR F C1 BRTMAIN MENU
IVC35M
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
ENVIRONMENT SETTING
MEMORY CARD
OPTION SCREEN SAVE COLOR F C1 BRT
1
INITIALIZATION
ALL-INIT
INIT-RAM
NG-IMG-INIT
2
SELF DIAGNOSIS
EXEC
OPTION SCREEN SAVE COLOR F C1 BRT
1
INITIALIZATION
ALL-INIT
INIT-RAM
NG-IMG-INIT
2
SELF DIAGNOSIS
EXEC
VRAM OK
SDRAM OK
TIME OK
TYPE COND
OK
REFFERENCE IMG OK
BOOT-PROG OK
SYSTEM-PROG OK
DIAGNOSING
SET=EXEC ESC=BACK SEL=CHNG IMG TRG=FUNC