User`s manual

6-13
Setting and Operating Outlines
6
Positional deviation measurementArea measurement by binary conversion
Set wizard operation chart
中止
静 C1 明 設定ｳｨｻﾞ-ﾄﾞ
Menu tree
F C1 BRTSET WIZARD EXIT
[
SAMPLE
]
STEP5
SELECT A COLOR IMAGE
PROCESSING MODE
1 COLOR FILTER ■
2
EXTRACT COLOR □
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1 MEAS SEL MEAS-BIN-AREA
RETURN NEXT
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS01 (POSI-DEVIATION F)
IMG PRE-PROC
MEAS CND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/0
1
COLOR MODE
2
COLOR FILTER SET
3
MEAS SELECTION
COLOR F C1 BRTSELECT OBJECT TYPE COND
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
+
+
+
1
COLOR MODE
2
COLOR FILTER SET
3
MEAS SELECTION
COLOR F C1 BRTSELECT OBJECT TYPE COND
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
+
+
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS01 (MEAS-BIN-AREA F)
IMG PRE-PROC
MEAS CND
EVALUATION COND
NUM-CALC
OUT-COND
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/0
中止
静 C1 明 設定ｳｨｻﾞ-ﾄﾞ
F C1 BRTSET WIZARD EXIT
[
SAMPLE
]
STEP5
SELECT A COLOR IMAGE
PROCESSING MODE
1 COLOR FILTER ■
2
EXTRACT COLOR □
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1 MEAS SEL POSI-DEVATION
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：COLOR IMAGE CORRECT
STEP4：MEAS1/CAM1
STEP5：MEAS1/F/BIN-AREA
STEP6：MEAS1/WINDOW/MASK,1
STEP7：MEAS1/MEAS CND
STEP8：MEAS1/EVALUATION
STEP9：MEAS1/CALC
STEP10：MEAS1/OUT
STEP11：FINAL NUMERIC CALC
STEP12：FINAL OUTPUT COND
STEP13：SERIAL OUTPUT/ANY
STEP14：OPS MENU COND
STEP15：CALIBRATION/YES
STEP16：MOVE ALL WINDOW/YES
STEP17：TITLE/YES
End
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：COLOR IMAGE CORRECT
STEP4：MEAS1/CAM1
STEP5：MEAS1/F/POSI DEVIAT
STEP6：MEAS1/MEAS CND
STEP7：MEAS1/DTECT PRECISION
STEP8：MEAS1/EVALUATION
STEP9：MEAS1/CALC
STEP10：MEAS1/OUT
STEP11：FINAL NUMERIC CALC
STEP12：FINAL OUTPUT COND
STEP13：SERIAL OUTPUT/ANY
STEP14：OPS MENU COND
STEP15：CALIBRATION/YES
STEP16：MOVE ALL WINDOW/YES
STEP17：TITLE/YES
End
NO
POSI-DEVATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BAG/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG
NO
POSI-DEVATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BAG/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG
6-6 Relationship between the set wizard program, the operation chart,
and the menu tree
If you change the operation chart using the set wizard, the menu tree will also change. If you change a
setting on the menu tree, the operation chart in the set wizard will also be changed.
Ex.: Change measurement type from "positional deviation measurement" to "area measurement
by binary conversion."
If you change the positional deviation measurement to area measurement by binary conversion using the
set wizard program, the corresponding item on the menu tree will also change.