User`s manual

6-10
Setting and Operating Outlines
6
2. A pop up menu will appear and you can chose
"CHANGE," "ADD," or "DELET" from it.
Or, while the cursor is in the " OPERATION
CHART," move the cursor to any desired step
number and press the SET key. You can then edit
that step. (You cannot delete a step using this
access method.)
3. To quit editing, press the TRG/BRT key and move
the cursor to "EXIT" in the upper function menu.
Then, press the SET key. (Or, press the ESC key
twice.)
4. The screen will ask "SAVE OK?." Move the cursor to "OPERATION
CHART" or "NEW SAMPLE" using the up and down arrow keys, and
press the SET key.
- The changes will be written into the current operation chart.
- Save as new sample (The original operation chart will not be
changed.)
Note: To change the sample, you can select "NOW SAMPLE" or
"NEW SAMPLE."
COLOR F C1 BRTSET WIZARD EXIT
[
SAMPLE
]
STEP4
SELECT A CAMERA TO SPECIFY
MEASUREMENT CONDITIONS
1 NO REGISTRATION □
2
CAM1 ■
3
CAM2 □
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：COLOR IMAGE CORRECT
STEP4：MEAS1/CAM1
STEP5：MEAS1/F/BIN-AREA
STEP6：MEAS1/WINDOW/MASK,1
STEP7：MEAS1/MEAS CND
STEP8：MEAS1/EVALUATION
STEP9：MEAS1/CALC
STEP10：MEAS1/OUT
STEP11：FINAL NUMERIC CALC
STEP12：FINAL OUTPUT COND
STEP13：SERIAL OUTPUT/ANY
STEP14：OPS MENU COND
STEP15：CALIBRATION/YES
STEP16：MOVE ALL WINDOW/YES
STEP17：TITLE/YES
End
SET WIZARD EXIT
[
SAMPLE
]
SAVE OK?
■
OPERATION CHART
□
NEW SAMPLE
YES=SET, NO=ESC
F C1 BRTSET WIZARD SCREEN EDIT SAVE
[
SAMPLE
]
1 CHG-TYPE
2 STANDARD WIZARD
3 OPERATION CHART
CHANGE
ADD
DELET
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：COLOR IMAGE CORRECT
STEP4：MEAS1/CAM1
STEP5：MEAS1/F/BIN-AREA
STEP6：MEAS1/WINDOW/MASK,1
STEP7：MEAS1/MEAS CND
STEP8：MEAS1/EVALUATION
STEP9：MEAS1/CALC
STEP10：MEAS1/OUT
STEP11：FINAL NUMERIC CALC
STEP12：FINAL OUTPUT COND
STEP13：SERIAL OUTPUT/ANY
STEP14：OPS MENU COND
STEP15：CALIBRATION/YES
STEP16：MOVE ALL WINDOW/YES
STEP17：TITLE/YES
End