User`s manual

6-9
Setting and Operating Outlines
6
4. Change the object type number on the operation
chart to the desired object type number.
Select " CHG-TYPE" and press the SET key.
Then press the up and down arrow keys to change
the object type number.
After selecting a number, press the ESC key.
5. Move the cursor to " OPERATION CHART"
using the up and down arrow keys and press the
SET key. The operation chart for the selected
object type will be displayed on the right side of
the screen.
Reference: To use a sample operation chart,
move the cursor to the sample
number desired and press the SET
key. (Ex.: )
Note: If no measurement conditions are set, the
screen will not display any operation chart
when you select " OPERATION CHART."
[2] How to edit an operation chart
1. While looking at an open operation chart, select the item you want to edit using the up and down
arrow keys. Press the TRG/BRT key, and move
the cursor to "EDIT" in the upper function menu.
Then, press the SET key.
SEL
ESC
SET
TRG/BRT
SCREEN SAVE DEL
COLOR F C1 BRTSET WIZARD
[
SAMPLE
]
1
CHG-TYPE
2 STANDARD WIZARD
3 OPERATION CHART
TYPE 00
Start
End
Change using the up and
down arrow keys.
EXIT
[
SAMPLE
]
1 CHG-TYPE
2 STANDARD WIZARD
3 OPERATION CHART
4 AREA Sample
COLOR F C1 BRTSET WIZARD
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：COLOR IMAGE CORRECT
STEP4：MEAS1/CAM1
STEP5：MEAS1/F/BIN-AREA
STEP6：MEAS1/WINDOW/MASK,1
STEP7：MEAS1/MEAS CND
STEP8：MEAS1/EVALUATION
STEP9：MEAS1/CALC
STEP10：MEAS1/OUT
STEP11：FINAL NUMERIC CALC
STEP12：FINAL OUTPUT COND
STEP13：SERIAL OUTPUT/ANY
STEP14：OPS MENU COND
STEP15：CALIBRATION/YES
STEP16：MOVE ALL WINDOW/YES
STEP17：TITLE/YES
End
COLOR F C1 BRTSET WIZARD SCREEN EDIT SAVE
[
SAMPLE
]
1 CHG-TYPE
2 STANDARD WIZARD
3 OPERATION CHART
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：COLOR IMAGE CORRECT
STEP4：MEAS1/CAM1
STEP5：MEAS1/F/BIN-AREA
STEP6：MEAS1/WINDOW/MASK,1
STEP7：MEAS1/MEAS CND
STEP8：MEAS1/EVALUATION
STEP9：MEAS1/CALC
STEP10：MEAS1/OUT
STEP11：FINAL NUMERIC CALC
STEP12：FINAL OUTPUT COND
STEP13：SERIAL OUTPUT/ANY
STEP14：OPS MENU COND
STEP15：CALIBRATION/YES
STEP16：MOVE ALL WINDOW/YES
STEP17：TITLE/YES
End