User`s manual

ManualsBrandsSharp ManualsDigital CameraIV-C35M

6-1

Setting and Operating Outlines

Chapter 6: Setting and Operating Outlines

6-1 Setting and operating procedures

This paragraph describes the rough operation sequence of the IV-C35M.

1 System design

(Ref. chapter)

Plan your hardware environment to suit your use of the IV-C35M.

- Measurement program (positional deviation

measurement, degree of match inspection, etc.)

- Number of cameras, externally connected devices,

system components

- Selection of color and monochrome cameras

- Input/output (start measurement input, result

output, object type change, etc.)

- Lighting equipment, illumination, shutter speed, lens, etc.

1-4 Measurement programs

3-1 Basic system configuration

3-2 System configuration examples

5-1 Installation conditions

6-7 Editing operation screen

6-8 Option

5-2 to 5-4 Installation, connection

and wiring methods

2 Installation/assembly

Install the hardware you will be using.

- Connection of cameras and monitor to the controller

- Installation of the controller and camera body

- Connection of a power supply, input/output terminals

and external devices

Supply power to each device.

3 Turning ON the power supply (controller and monitor)

5 Enter measuring programs

6 Editing Operation screen

7 Other settings

8 Operation

9 Test/inspection

0 Maintenance

4 Environment settings

Set IV-C35M parameters according to the actual hardware environment.

- Setting the Input / Output conditions

- Communication

- Computer link

- Gain / offset adjustment

Entered using the

menu tree

Entered using the

wizard

Self Diagnosis Initialization