User`s manual

5-17

Connection and Installation Methods

(2) Installing the camera body

Attach the camera (IV-C30C5, IV-S30C3) on the mounting surface with the camera angle bracket

(supplied with the camera).

- Installation example 1

- Installation example 3

- Installation example 2

Mounting

surface

Mounting

surface

Mounting

surface

Camera angle bracket

IV-C30C5, IV-S30C3

Camera front view Camera side view

Camera lens

(IV-S20L16 or similar)

Installation procedure

1. Attach the camera angle bracket to the tapped M3 hole on the camera body (20 mm mounting

pitch: one of three holes). Two screws (M 3 x 6) are supplied with the camera for attaching the

angle.

2. Attach the camera controller angle to the mounting surface with the slotted holes 3.2 mm wide

(20 mm mounting pitch) or 1/4-20 UNC threaded hole.

The external dimensions of the camera angle bracket and the IV-C30C5, IV-S30C3 camera body are

shown on the following page.