User`s manual

1-6
１
Outline
Image after extracting a colorCaptured image
Extracted color (red)
Measurement
area
Measured result
Color degree of match = (Binary area / Measurement area size) x 100
[Inspection procedures]
Capture image → Color extraction (binary conversion)→ Measurement
[Measurement results]
・Binary area
・Color degree of match
・Average hue
・Average saturation
Purpose
Example
Evaluate whether the extracted color matches the reference.
Application
* Other colored pencils are
extracted one after the
other.
* When the arrangement is
appropriate, all the
measurement area will be
white after extracted each
color one after the other.
Color extracted area
changes to white.
Inspect arrangement of colored pencils (Check if the colored pencils are arranged in
proper order.)
1-4 Measurement program
The IV-C35M integrates the following measurement programs.
Color extraction mode: Color evaluation, color shading (uneven color) inspection, color position
measurement, area measurement by binary conversion, object identification by
binary conversion, and counting objects by binary conversion.
Color filter mode: Fault inspection, position deviation measurement, degree of match inspection,
lead inspection, BGA/CSP inspection, area measurement by binary conversion,
counting objects by binary conversion, object identification by binary
conversion, point measurement, multiple position measurement, and multiple
degree of match inspection.
You can select operating condition parameters to suit your application of the IV-C35M.
A description of each screen area is shown below.
[1] Color extraction mode
(1) Color evaluation