User`s manual

7-28
Setting Examples Using the Set Wizard
7
MEAS SHAPE (MDL0)
Move the cursor to this line and press the SET
key. A popup menu will appear.
Move the cursor to "RECTANGLE", "X- LINE" or
"Y- LINE" and press the SET key. In this
example, select "RECTANGLE."
For details, see page 3-15 in Function and
Operation.
REFIMG ARE (MDL0)
Move the cursor to this line and press the SET
key. The "SET" line will be highlighted. Press the
SET key again and the "RECTANGLE" setting
screen will appear.
Adjust the size of the rectangle by setting
" UP.L" and " LO.R" (upper left and lower
right corners) in order to establish the reference
image area.
After the position of the rectangle is correct, press the SET key.
1
REGISTER NO 0 (0∼7)
2
MEAS SHAPE (MDL0) RECTANGLE
3
REF IMG ARE (MDL0) SET (224, 208)∼(287, 271)
4
SEARCH ARE (MDL0) SET (216, 200)∼(295, 279)
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
REG COND SCREEN COND SAVE DETAIL
RECTANGLE
X-LINE
Y-LINE
1
UP. L (224, 208)
2
LO. R (287, 271)
3
MOVE
4
REFFERENCE IMG
SET=MOVE ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
RECTANGLE RESET RETURN
X:224 Y:208
UP.L
The upper left corner of the rectangle can be moved up, down, left, and right.
LO.R The lower right corner of the rectangle can be moved up, down, left, and right.
MOVE
The rectangle can be moved up, down, left, and right. Select "3MOVE" and
press the SET key to display a cross hair cursor on the screen. Now, move
the rectangle by pressing the up, down, left, and right arrow keys. When it is
in position, press the SET key to confirm it.