User`s manual
7-26
Setting Examples Using the Set Wizard
7
(9) Move the cursor to the " MEAS SEL" line using the
up and down arrow keys, and press the SET key.
Select "POSI-DEVIATION" from the popup menu.
Then, select "NEXT" to move to the next screen.
= In this example, the settings on the screens are not changed. Select "NEXT" on each of these
screens to go to the next screen. =
(10) Select a registration number
Move the cursor to " REGISTER NO. (0 ~ 7)" and
press the SET key. While this item is highlighted,
press the up and down arrow keys and press the
SET key when the number you want appears.
* In this example, select "0."
Next, move the cursor to " GRAY-SRC" on the
"SELECT AN IMAGE PROCESSING" line and
press the SET key.
Move the cursor to " NUM. OF DTECT" and press
the SET key. Select the "1P" on the popup menu
and press the SET key.
Move the cursor to " DTECT ANGL" on the
"ENTER A RANGE AND UNITS FOR ROTATION
ANGLE DETECTION" line and select an angle
("NO," "±15˚," "±30˚," "±45˚" or "360˚") on the pop
up menu. When an angle other than "NO" is
selected, "10" is displayed for the " UNIT."
In this example, select "NO."
The "DETAIL" item will appear in the lower menu.
Move the cursor to "DETAIL" and press the SET key.
Now "REG COND" screen will appear.
Select whether or not to process the captured image.
Calculation between images - See page 3-30 in Function and Operation
Density conversion - See page 3-33 in Function and Operation
Space filter - See page 3-34 in Function and Operation
STEP5
SELECT TYPE OF CALCULATION
BETWEEN IMAGES
1
COMPARE IMG
NO
SELECT WHETHER OR NOT TO
CONVERT IMAGE DENSITY
1
CHING GRAY LEVEL NO
SELECT FILTER TYPE FOR
IMAGE DATA
1
SPACE FILTER NO
RETURN NEXT
STEP4
SELECT A COLOR IMAGE
PROCESSING MODE
1
COLOR FILTER
■
2
EXTRACT COLOR
□
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1
MEAS SEL POSI-DEVIATION
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
STEP4：MEAS1/F/POS DEVIAT
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
NO
POSI-DEVIATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG
COLOR F C1 BRTSET WEZARD EXIT
[SAMPLE]
STEP5
1
REGISTER NO.（0∼7） 0
SELECT AN IMAGE PROCESSING
1
NO
□
2
GRAY-SRC
■
3
EDGE DTECT
□
4
SCH＋EDGE
□
5
ROTAT-SCH(HIGH)
□
1
NUM. OF DTECT
1P
ENTER A RANGE AND UNITS FOR
ROTATION ANGLE DETECTION
1
DTECT ANGLE NO
RETURN NEXT DETAIL
NO
±15°
±30°
±45°
360°
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
STEP4：MEAS1/F/POS DEVIAT
STEP5：MEAS1/MEAS CND
End
1P
2P