User`s manual

7-25
Setting Examples Using the Set Wizard
7
(7) Select an image-processing method
Move the cursor to " COLOR FILTER" and
press the SET key.
Next move the cursor to "COLOR FILTER SET"
using the up and down arrow keys and press the
SET key. Select "DETAIL" to enter the "COLOR
FILTER SET" screen.
(8) On the " FILTER TYPE" item, select a filter from
the popup menu.
After the settings are complete, press the ESC key to return to the "SET WIZARD" screen.
STEP4
SELECT A COLOR IMAGE
PROCESSING MODE
1 COLOR FILTER ■
2
EXTRACT COLOR □
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1 MEAS SEL NO
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
RED Displays red areas more brightly.
GREEN Displays green areas more brightly.
BLUE Displays blue areas more brightly.
BRIGHT LEV
Displays areas that are within the specified brightness range (within
the specified upper and lower limits) more brightly.
ANY
Specify the optimum color filter parameters to use, based on the
original image conditions.
1
FILTER TYPE RED
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
COLOR FILTER SET SCREEN COND SAVE