User`s manual

1-3
１
Outline
Capturing whole image
Decreased capturing time
1
2
Capturing partial image
* When capturing 240 lines from vertical 480 lines.
＊
Tree menu
The tree structure menu lets you find the setting parameter you
need easily. Using the short cut function, you can move directly to a
desired menu.
Operation screen editing function
You can move, remove, enlarge, and decrease the size of the information displayed on the operation
screen.
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0
POSI-CORRECT
MEAS01(MEAS-BIN-AREA P)
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
+
+
+
VX.XX
X0∼7Y0∼7 READY
COLOR F C1 BRT(TYPE00)
OK
MEAS XXXXms 2001-10-14 10:38
MEASUREMENT 1 MEAS-BIN-AREA
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
A00=001884 OK
A01=
A02=
A03=
A04=
A05=
A06=
A07=
X0∼7Y0∼7 READY
COLOR F C1 BRT(TYPE00)
OK
MEAS XXXXms 2001-10-14 10:38
MEASUREMENT 1 MEAS-BIN-AREA
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
A00=001884 OK
A01=
A02=
A03=
A04=
A05=
A06=
A07=
OK
VX.XX
Shorten the cycle time by connecting two cameras
The two IV-C30C5 color cameras or two IV-S30C3/C4 high-speed monochrome cameras can be
simultaneously connected to IV-C35M controller. By connecting two cameras, your system can reduce
the processing time by positioning two areas at the same time, and then inspecting two areas at the
same time. By triggering the cameras at the same time, the system can capture two images, and
display the images above and below each other, or left and right.
Note: Combined use of a color camera and a high-speed monochrome camera is not possible.
High-speed processing now possible using a color camera or a high-speed monochrome
camera and partial image capture
Sharp's unique partial image function offers high-speed image capture.