User`s manual

21-16
Setting the Input/Output Conditions
21
Measurement is started when the CCD trigger level is ON.
Measurement is started when a CCD trigger signal is received.
■ Configuration example
Controller
Power supply (24 VDC)
Monitor
Camera 1 (image capturing + CCD trigger)
Camera 2 (image capturing)
Remote key pad
Data
CCD trigger
Work
Black White
Edge
Level
Measurement
Personal computer
Select one of
these.
■ Setting order 1 → 2 (→ 3 )
2
START CCD SAMPL
3
OUTPUT OBJ TYPE
PARALLEL
SERIAL+USB
AUTO(EDGE)
AUTO(LEVEL)
PARALLEL
SERIAL+USB
1MEAS INP I/F
PARALLEL+SERIAL+USB
TRIG CCD START
IV-S3＊M
OUTPUT
INPUT
POWER
Y7Y0 Y1 Y2 Y3 Y4 Y5 Y6
COM
COM
＋24V
X7X0 X1 X2 X3 X4 X5 X6
READY
0V
VIDEO
CAMERA1
CAMERA2
USB
RS232C/RS422
REMOTE
(10) Measurement start input = CCD trigger, start sampling = auto, object type change = general
purpose serial, result output = general purpose serial/parallel
The general purpose serial command (code 55(H)) is used to change the object type.