User`s manual
13-3
Color Positional Measurement
13
REGISTER NO.
Select register number to measure. When
making color positional measurement, you can
select any register from 0 to 7 (a total of 8
registers).
MODE
Select a mode for detection.
The details of each mode are as follows.
.
REGISTER NO. ( MDL 0, MDL 1)
The specified modes are displayed for each register number on these lines. When a 1-point search
or 1-point edge is specified, only " MDL 0" will be available. When a 2-point search, 2-point edge,
or 1-point search and 1-point edge is specified, " MDL 1" is also available.
The "S" in the table indicates a gray search, and the "E" indicates edge detection. "X" means not
used.
• An example of mode settings
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
ＳＳＳＥＥ×××
Ｓ×ＥＥ××××
○○××××××
REGISTER NO.
3MDL0
4MDL1
EXTRACT COLOR
S：Gray search
E：Edge detection
×：No setting
REGISTER0 : 2P-SCH
REGISTER1 : 1P-SCH
REGISTER2 : 1P-SCH + 1P-EDGE
REGISTER3 : 2P-EDGE
REGISTER4 : 1P-EDGE
Detection Mode Details Usable models
NO (None) Does not detect.
1P-SCH
(1-point search)
Detect the positional deviation of one point in the
scanned image compared to a single reference image,
after performing a gray search.
Model 0 only
2P-SCH
(2-point search)
Detect the positional deviation of two points in the
scanned image compared to two reference images,
after performing a gray search.
Model 0 and 1
1P-EDGE
(1-point edge)
Detect the positional deviation of one point in the
scanned image compared to a single reference image,
after performing edge detection.
Model 0 only
2P-EDGE
(2-point edge)
Detect the positional deviation of two points in the
scanned image compared to two reference images,
after performing edge detection.
Model 0 and 1
1P-SCH + 1P-EDGE
(1-point search and
1-point edge)
Detect the positional deviation of two points, one point
after performing a gray search and one point after
performing edge detection.
Model 0 and 1
1
REGISTER NO. 00 (0∼7)
2
MODE 1P-SCH+1P-EDGE
REGISTER NO.
3
MODL 0
4
MODL 1
EXTRACT COLOR
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT
MEA-CND SCREEN COND SAVE
15141312111009080706050403020100
SS ××××××
SE ××××××
×× ××××××