User`s manual

12-7
Color Unevenness Inspection
12
Numeric calculation setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using the
left and right arrow keys. Press the SET key to show the popup menu. Select "NUM-CALC" from the
popup menu.
- Select "NUM-CALC" on the menu tree.
See "Chapter 19: Numerical calculation."
Output condition setting
- Press the TRG/BRT key to move the cursor to the upper function menu, and highlight "COND" using the
left and right arrow keys. Press the SET key to display the popup menu. Select "OUT" from the popup
menu.
- Select "OUT-COND" on the menu tree.
See "Chapter 21: Setting the Input/Output Conditions."
Display the measurement results
Return to the operation screen and press the TRG/BRT key. The measurement results will be displayed
on the screen.
COLOR F C1 BRT
V＊. ＊＊
(TYPE00)
OK
MEAS 0025ms 2002-02-04 16:13
MEASUREMENT 1 INSPECT COLOR SHADING
REGISTER NO. (0∼3)
K=015 OK
A=003700 OK
R=003628 OK
000001
H=155.8 OK
138.7
EH = 000000 OK
S=061.7 OK
042.7
ES = 000000 OK
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
X0∼7
Y0∼7
READY
Number of objects
Tota l area
Max. area
Min. area
Max. hue
Min. hue
Hue fault
Max. saturation
Min. saturation
Saturation fault