User`s manual

11-4
Color Evaluation
11
How to set the register conditions
How to enter the REG-COND setting screen
There are three methods for getting to the REG-COND setting screen.
1) On the "MEA-CND" setting screen, move the
cursor to the " BIN AREA COND" and
press the SET key. The cursor will move into
the table. Move the cursor to the "○" column
and press the SET key.
Note: If you press the SET key in the "X"
column, the setting will be invalid.
2) On the "MEA-CND" setting screen, press the
TRG/BRT key to move the cursor to the upper
function menu. Select the "COND" item and
then select the "REG COND" item and press
the SET key.
3) On the menu tree, move the cursor to the
"MEAS CND" item, and press the right arrow
key. The sub menu which contains the "REG
COND" item will appear. Move the cursor to
this item and press the SET key.
Set the register conditions
REFERENCE COLOR
Select a reference color for color extraction
from the already registered colors (when
more than two colors are registered).
1
WINDOW NORMAL
2 REGISTER NO. 00 (0∼7)
3 REGISTER EXIST NO
REGISTER NO.
4 BIN AREA COND
EXTRACT COLOR
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT
MEA-CND SCREEN COND SAVE
REG COND
EVALUATION
NUM-CALC
OUT
15141312111009080706050403020100
× × × × × × ×
××××××××
×
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0 (POSI-DEVIATION F)
POSI-CORRECT
MEAS01 (COLOR EVALUATION P)
MEAS CND
REG COND
EVALUATION COND
NUM-CALC
OUT-COND
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM. CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
1
REGISTER NO.
2
DEFFERENCE COLOR
3
MEAS SHAPE
4
MEAS AREA
COLOR F C1 BRTSELECT OBJECT TYPE COND
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
+
1 REFERENCE COLOR
0 (0∼7)
2
MEAS SHAPE RECTANGLE
4 MEAS AREA SET (224, 208)∼(287, 271)
COLOR F C1 BRT
REG CND SCREEN COND SAVE DETAIL