User`s manual

4-5
Positional Deviation Measurement
4
Object to measure
+
REG COND SCREEN COND SAVE DETAIL
1
REGISTER NO. 0(0∼7)
2 MEAS SHAPE (MDL0) RECTANGLE
3 REFIMG ARE (MDL0) SET（224.208)∼(287.271）
4 SEARCH ARE (MDL0) SET（216.200)∼(295.279）
SEL=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
BLUE F C1 BRT
Search area
+
REG COND SCREEN COND SAVE DETAIL
1
REGISTER NO. 0(0∼7)
2 MEAS SHAPE (MDL0) RECTANGLE
3 REFIMG ARE (MDL0) SET（224.208)∼(287.271）
4 SEARCH ARE (MDL0) SET（216.200)∼(295.279）
SEL=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
BLUE F C1 BRT
RECTANGLE
X-LINE
Y-LINE
Object to measure
Search area
[1] Set the register conditions for a gray search
This paragraph describes setting procedures when the mode (see page 4-3) is set to "1-PNT SCH."
MEAS SHAPE
Select a window shape to be used for the
positional deviation measurement.
Select "RECTANGLE," "X-LINE," or "Y-LINE"
from the popup menu on the " MEAS SHAPE"
line.
REFIMG ARE
Move the cursor to " REFIMG ARE(MDL0)"
and press the SET key. When the SET item is
highlighted, press the SET key again to bring up
the setting screen.
ELGNATCER
rofsetanidroocyficepS
rewoldnatfelreppueht
wodniwehT.srenrocthgir
aeraralugnatceraeblliw
esehtybdenifed
.setanidrooc
ENIL-X
ehtmorfenilafohtgneL
tniopdneehtottnioptrats
.sixaXehtno
ENIL-Y
ehtmorfenilafohtgneL
tniopdneehtottnioptrats
.sixaYehtno