User`s manual

Setting the Conditions for Each Object Type
3-41
3
5. Select "0" using the up and down keys and
then select "MOVE" using the left and right
keys. Finally, press the SET key.
6. Move vertex 02 to 08 a little outside of the
first point on the star using the up, down,
left, and right keys, and then press the SET
key.
7. After creating a mask area, press the ESC
key to return to the "MASK BINARY IMG"
screen. Select " MASK REGIST" and
press the SET key. The cursor will move to
the "REG" position. Press the SET key to
register the mask.
- The area inside the mask will change to
white. To invert the inside and outside
shades (change white to black and black
to white), select "YES" on the " MASK
INVERT B/W" line.
MASK BINARY IMG SCREEN SAVE
RED F C1 BRT
1 MASK AREA SET
2 MASK IMVERT B/W NO
3 MASK REGIST. REG DISP
X:124 Y:276
POLYGON RESET MOVE RETURN
RED F C1 BRT
1 POINT01 (255,255)
2 POINT02 (254,226)
3 POINT03 (221,226)
4 POINT04 (221,251)
5 POINT05 (274,276)
6 POINT06 (274,247)
7 POINT07 (257,247)
8 POINT08 (124,276)
X:256 Y:240
1 POINT01 (255,255)
2 POINT02 (254,226)
3 POINT03 (221,226)
4 POINT04 (221,251)
5 POINT05 (274,276)
6 POINT06 (274,247)
7 POINT07 (257,247)
8 POINT08 (309,294)
POLYGON RESET MOVE RETURN
RED F C1 BRT