User`s manual
1-2
Setting and Operating Outline
1
STEP9
STORE THIS SETTING AS A
SAMPLE IN THE WIZARD?
1
NO
□
2
YES
■
RETURN END
・・・
・・・
STEP2
SELECT AN IMAGE CAPTURING
METHOD DURING OPERATION
1
PARTIAL-IMG
■
2
ALL IMAGE
□
3
NO CAPTURED
□
ENTER A SHUTTER SPEED
(1/30∼1/10000)
1
SHUTTER SPEED 1/00060
RETURN NEXT
STEP1
SELECT THE MEASUREMENT
START INPUT I/F
1
PARALLEL+SERIAL+USB
■
2
TRIG
CCD START
□
NEXT DETAIL
IVC35M
SYS-CND
OBJECT TYPE COND
SET WIZARD
EDIT MAIN OPS MENU
OPTION
ENVIRONMENT SETTING
MEMORY CARD
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：COLOR IMAGE CORRECT
STEP4：MEAS1/CAM1
STEP5：MEAS1/F/BIN-AREA
STEP6：MEAS1/WINDOW/MASK,1
STEP7：MEAS1/MEAS CND
STEP8：MEAS1/EVALUATION
STEP9：MEAS1/CALC
STEP10：MEAS1/OUT
STEP11：FINAL NUMERIC CALC
STEP12：FINAL OUTPUT COND
STEP13：SERIAL OUTPUT/ANY
STEP14：OPS MENU COND
STEP15：CALIBRATION/YES
STEP16：MOVE ALL WINDOW/YES
STEP17：TITLE/YES
End
1-2 Method for selecting the menu configuration
(1) Set wizard
The IV-C35M has a "Set Wizard" function to assist beginners in setting the measurement conditions.
Select "SET WIZARD" from the "MAIN MENU" and the wizard will show the
items needed for each step. You only need to make selections according the
instructions on the screen. Using the wizard, you can establish the minimum
required settings for making measurements.
The steps that the set wizard takes you through are displayed as lists on the
"operation chart." At any point you can return to the previous step to make a
change if you want to.
Wizard
The "Wizard" is a program that helps users make settings for measurement operations easily and
without making mistakes. The controller asks you a series of questions at each step and you
simply answer these to complete the settings.
The wizard is convenient for making settings when beginners and inexperienced operators are
operating the machine. However, operators who are familiar with the operation may save a lot of
time by using other setting methods.