Version 1.3 Created in December 2004 Instruction Manual for IV-08MTV LCD Color Monitor Thank you for purchasing our IV-08MTV LCD Color Monitor. Before using it, read this manual carefully to become familiar with its functions and proper use. Notes - This manual was written with the utmost care. However, if you have any questions or inquiries concerning the product, please feel free to contact our dealers or service agents. - Copying all or part of this booklet is prohibited.
Safety Precautions Read this user's manual and the attached documents carefully before installing, operating, or performing any maintenance, in order to keep the machine working correctly. Make sure you understand all of the equipment details, safety information, and cautions before using this machine. In this user's manual, the safety precautions are categorized as "Caution." Caution : Improper handling may cause dangerous situation, moderate or light injury, or damage to equipment.
1. Outline / Features The IV-08MTV (or simply the Monitor) is a compact, 8.4" screen liquid crystal color monitor. - It meets the IP65 regulations (when installed in a frame) making it suitable for FA use. - The Monitor's brightness, color, and contrast can be adjusted and the display language can be switched between Japanese and English. - An external monitor can be connected to its video output terminal.
2. Precautions for Use Please note the following points when handling the Monitor. (1) Installation location and environment - The Monitor should be used in a location with an ambient temperature of 0 to 45 oC and a relative humidity of 90%RH or less. If the ambient temperature is higher than the maximum temperature above, install a fan for forced air cooling or an airconditioner to conditioning the space to bring the ambient temperature within the specified range.
3. System Configuration IV-08MTV *1 IV-S30 series IV-C35 Monitor cable *2 (cable length: 2 m) Adj. POWER *1 IV-S51M IV-S51M POWER FG +24V USB +0V Y0 COM Y1 Y2 Y3 USB Y4 Y5 TERMINATOR Y6 LINK Y7 Y8 Y9 Y10 Y11 EXP LAN Y12 RX Y13 ANALOG RGB Y14 Y15 RDY HALT C (-) CAMERA1 X0 X1 X2 X3 Video cable (Commercially available item: Less than 10 m) X4 IV-08MTV Adj.
4. Name and Function of Each Part [Top view] 220.6 (Unit: mm) (7) Mounting holes (4 positions: two at bottom) [Side view] 53.3 [Front view] 192 177.6 235 POWER Adj.
Name Function (1) DC input terminal (24 VDC) Terminal used to supply power to the Monitor. - Connect the cable from AC adapter here (Monitor accessory). (2) Video input terminal (VIDEO IN) Terminal used to supply an NTSC video signal (from an IV-S30/C35M etc.) to the Monitor. - Connect a monitor cable here (IV-S30/C35M accessory). (3) Terminal used to output an NTSC video signal from the Monitor.
5. Installation Method Secure the Monitor using the mounting bracket (Monitor accessory) in the mounting holes on the Monitor housing (4 positions). For specific external dimensions, see Section 4. "Name and Function of Each Part", in this manual. 1) Cut a rectangular hole (222±0.5 x 179±0.5 mm) in the control panel (thickness: Max. 7 mm) and install the Monitor housing in this hole. x.
220.6 (Unit: mm) 192 177.6 10.6 198.8 10.
When using the specialized stand Install the Monitor on the specialized stand (custom order item). Then the Monitor can be used in a standalone configuration. Rotation center IV-08MTV Stand ■ Dimensional drawings when the Monitor is installed on the stand Mounting screws on the Monitor housing (stand accessories) Plan view of the stand 230 22.9 8 235 130 235 148 230.7 192 53.3 2.5 230 -9- 125 127.5 23.5 5.2 125 127.5 125 2.
6. Connection Method [1] To connect the Monitor to an IV-S30 series controller or an IV-C35M Connect the NTSC video input terminal (VIDEO IN) on the Monitor to the monitor connector on the IVS30 series (controller), or the IV-C35M, using the monitor cable (*1). [Rear view of the IV-08MTV] Video input terminal (VIDEO IN) ANALOG RGB VIDEO OUT VIDEO IN IV-S30 series IV-C35M Monitor connector DC 24V Monitor cable *1 (Cable length: 2 m) *1: The monitor cable is an IV-S30 series and IV-C35M accessory.
[2] To connect the Monitor to an IV-S51M or a personal computer Connect the analog RGB connector (ANALOG RGB) on the Monitor to the analog connector on the IVS51M or personal computer using an analog RGB cable (purchase one locally).
[3] Power connections Provide power by connecting the DC input terminal (24 VDC) on the Monitor to the AC adapter. Then plug the AC cord from the adapter (*2) into a 100 VAC power outlet. Make sure to connect the ground line on the power cord plug to a ground terminal on the power outlet. [Rear view of the IV-08MTV] AC adapter *2 AC cord *2 Power output (100 VAC) Power cord plug IV-08MTV connector ANALOG RGB VIDEO OUT VIDEO DC 24V IN Ground line Secure the AC adapter cord using the cable clamp.
[4] To connect two IV-08MTV monitors Connect the NTSC video output terminal (VIDEO OUT) on the IV-08MTV to the NTSC video input terminal (VIDEO IN) on another IV-08MTV using a standard video cable (available locally: less than 10 m). Then, you can monitor simultaneously at another location. The video output and video input terminals are RCA connectors.
7. How to Adjust the Screen Display This chapter describes the adjustment procedures and display items on the Monitor. [1] Adjustment procedure Adjust the display as follows. 1. Turn ON the power to the Monitor (Press the power key on the Monitor). 2. Press the [Adj] key on the Monitor. => The main menu will appear. 3. Select the item you want to adjust from the main menu using and keys. Then press the [Adj] key. => A detailed menu will appear. 4.
(2) When an analog RGB input signal is used Main menu AUTO SETUP LUMINANCE DISPLAY LANGUAGE OSD DISPLAY TIMER * SOURCE Detailed menu (default values) BASIC ADJUST AUTO COLOR ADJUST RETURN BACKLIGHT (85) BRIGHTNESS (100) CONTRAST (100) RECALL RETURN H.POSITION (43) V.
8. Specifications (1) General specifications Item Specifications Power supply Power consumption 100 to 240 VAC, 50/60 Hz (using the accessory AC adapter) Ambient storage temperature - 20 to + 60 oC Ambient operating temperature 0 to 45 oC Ambient humidity 35 to 90 %RH (non condensing) Environmental atmosphere No corrosive gases 10 W Protective construction Conforms to IP65 (front operation section only) Meets JIS B 3502 standards (when mounted in a control panel) Vibration and acceleration: 0.
(2) Performance specifications Item Display size Display type Driving system Number of pixels Display color Screen brightness Backlight working life Number of pixels Signal system *3 Image input connector Specifications 8.4 inches diagonal: 170.4 W x 127.8 H mm Transmissive type TFT liquid crystal panel TFT active matrix driving system 921,600 pixels: (640 W x 480 H) x 3, Ratio of functional pixels: 99.
