User`s guide

Chapter 6: Hockey

Entering two penalties with plus keys

1. Press the HOME PENALTY or VISITOR PENALTY keys.

2. Press +1, +2 or +3 keys to assign a penalty time for a single player.

Each of these three keys automatically enters the amount of penalty

time(s) you specified in Program Mode’s sport-specific settings for

hockey (see “SPORT-SPECIFIC SETTINGS FOR HOCKEY” ON PAGE 53). (This first

penalty time will not display on the LCD until you enter in the player

number in Step 4).

3. Press the +1, +2 or +3 keys to assign a second penalty time for that

single player. The penalty clock will then automatically add up these

two penalty times. (Likewise, This second penalty time also will not

display on the LCD until you enter in the player number in Step 4).

4. At the ENTER PLY.NO. prompt, enter the player number on the

numeric keypad and then press

ENTER.

5. The player number and tallied penalty time now appears on the LCD.

Example:

Player #23 receives a two-minute plus a five-minute penalty. The MP-70/

50 user presses the

+1 and +2 keys on the control, then enters in 23 for

the player number, thus giving player #23 a total of seven (2+5) minutes

in penalties. This tally of seven minutes is displayed on the LCD, as shown

below.

If you hit the ENTER key before you enter in the player number, the con-

trol will not accept the penalty. Instead, you will see a screen similar to the

one below, stating “NO PENALTY FOUND.” Re-enter the penalty and

player number using the correct sequence.