User`s guide

MP-70/50 Scoreboard Controller User’s Guide
46
• You may exit the programming sequence at any time by pressing the
ESC key. This will take you to the Quit prompt.
Update yardage
If you respond YES to the prompt shown above, the yardage values you
enter using the
DOWN PLACE, TO GO, and BALL ON EVENT keys
appear on the scoreboard automatically. Selecting
YES deactivates the
DISPLAY D, TG, BO key. If you press NO, you can display or blank the
yardage values simultaneously using the
DISPLAY D, TG, BO key.
Minutes tens to connector 2
This setting is exclusive to the FB-8218TK scoreboard, which supports
football soccer and track. It is available only when you have programmed
the MP-70/50 for use with the FB-8218TK (scoreboard type number 26).
See
“PROGRAMMING THE SYSTEM SETTINGS” ON PAGE 149 for more information on
scoreboard types.
When you are using the FB-8218TK scoreboard for football or soccer, press
YES at this prompt. Press NO only when you are using the FB-8218TK
scoreboard for a track and field event. When you press
NO, the MP-70/50
transmit tenths of seconds data to connector 2 of the scoreboard proces
-
sor pack. You must also redirect the writing at the scoreboard to complete
this change.
If you are using a scoreboard other than model FB-8218TK always press
YES at this prompt.