User`s guide

Chapter 4: Basketball
43
Correcting player statistics (MP-70 only)
If the points memory feature is active (see “POINTS MEMORY (MP-70 ONLY)” ON
PAGE 27), follow the steps below to correct player fouls or points as
needed.
1. Press HOME FOULS or VISITOR FOULS.
2. Press FOULS/PLAYER. The prompt appears, as shown above.
3. Type the player number and then press ENTER.
4. At the ENTER FOULS prompt, type the number of player fouls and
then press
ENTER.
5. At the ENTER PTS. prompt, type the number of player points and then
press
ENTER. The player’s statistics appear for fifteen seconds in the
player fouls region of the scoreboard and flash 10 times on statistics
panels if the scoreboard is so equipped.
If the points memory feature is not active, follow these steps to correct
player fouls:
1. Press HOME FOULS or VISITOR FOULS.
2. Press FOULS/PLAYER. The prompt appears, as shown above.
3. On the numeric keypad, enter the number of player fouls.
4. At the PLAYER NO. prompt, type the player number and then press
ENTER. The player’s statistics appear for 15 seconds in the player
fouls region of the scoreboard.
Note: These steps do not alter the team fouls or total score;
if those values require correction, you must adjust them sep
-
arately.