User`s guide

MP-70/50 Scoreboard Controller User’s Guide
42
Tracking fouls (MP-70 only)
Follow these steps to update team and player fouls.
1. Press HOME FOULS or VISITOR FOULS.
2. Press +1. The team fouls count increases by one.
If the foul memory feature is active, the prompt above appears on the LCD
display.
On the numeric keypad, On the numeric keypad, type the player number
and then press
ENTER. The player’s statistics appear for fifteen seconds in
the player fouls region of the scoreboard and flash 10 times on statistics
panels if the scoreboard is so equipped.
If you need to correct the team fouls value, follow these steps:
1. Press HOME FOULS or VISITOR FOULS.
2. On the numeric keypad, enter the total number of fouls and then press
ENTER.
Note: When you use the +1 key to update team fouls,
the number of team fouls stops increasing when it
reaches the maximum number of team fouls allowed.
This is the value you have specified at the MAX.T.FOULS
prompt in the sport-specific settings for basketball on
“MAXIMUM TEAM FOULS” ON PAGE 28.