User`s guide

MP-70/50 Scoreboard Controller User’s Guide
30
Timeout to scoreboard
If you want the timeout timer to appear on the scoreboard, press YES. If
you press
NO, the timer appears only on the MP-70/50’S LCD display.
Time set to (MP-70 only)
On the numeric keypad, enter the duration of the shot timer clock in sec-
onds and then press ENTER.
See “SETTING THE TIMER (MP-70 ONLY)” ON PAGE 37 for additional information
about selecting and programming default shot timer durations.
Clock set to
On the numeric keypad, enter the duration of the game period in minutes
and then press
ENTER.
Note: MP-70 controls can hold two different default
shot timer clock durations in permanent memory.
Control operator has the capability to switch between
these defaults.