User`s guide

25
4
If basketball is not the sport currently selected on the MP-70/50, or if you
want to change the controller’s settings for basketball, see
“SELECTING AND
CHANGING SPORTS” ON PAGE 173.
You should also verify that the controller has been programmed to use the
correct scoreboard type and data format as instructed in
“PROGRAMMING THE
SYSTEM SETTINGS” ON PAGE 149.
Sport-specific settings for
basketball
When you select basketball as instructed on “SELECTING AND CHANGING SPORTS”
ON PAGE 173, the MP-70/50 presents you with the sport-specific setting
options in the sequence outlined on the following pages. When you adjust
these settings, the MP-70/50 stores your selections in permanent memory.
Your settings become active each time you select basketball in the future.
• The sequence shown on the following pages presents you with all of
the options you could encounter while programming sports-specific
settings. However, these options presented to you may vary, depend
-
ing upon the type of your control (MP-70 or MP-50), the version num-
ber of the firmware in your control, the two-digit board type that
you’ve selected, your scoreboard model, or whether your basketball
game is taking place according to FIBA or North American rules.
Hence, not all of the options outlined in this chapter may appear on
your control.
• As you run through the following programming sequence, and you
find the need to back up to a previous programming option earlier in
the sequence, you can back up by selecting
SHIFT+8.
Basketball