User`s guide

MP-70/50 Scoreboard Controller User’s Guide
22
New Game
The MP-70/50 retains the data from the last game it was used for in mem-
ory. This is a precaution in case of power failure.
To clear that data and reset the controller to the default values you have
specified for the selected sport, follow one of the following two proce
-
dures.
1. Press SHIFT+NEW GAME.
2. At the NEW GAME prompt, press YES
Or
3. Hold down the CLR key while turning on the control.
CLK. UP/DN
This key lets you change the direction of the game clock. See “OPERATING
THE CLOCK” ON PAGE 13 for further information.
BLANK
The BLANK key allows you to blank selected digits on the scoreboard.
Follow these steps:
1. Press the key corresponding to the value you want to blank. For exam-
ple, if you want to blank the region of the scoreboard displaying the
home team’s score, press
HOME SCORE.
2. Press SHIFT+BLANK.
YES and NO
The YES and NO keys allow you to respond to prompts on the LCK dis-
play. In system settings, you do not need to press SHIFT to use these keys.
In normal operating mode, however, you must press and hold
SHIFT
while pressing
YES or NO.
NEXT
In system settings, the NEXT key lets you skip the current prompt without
changing the corresponding value.