User`s guide

MP-70/50 Scoreboard Controller User’s Guide

Operating the shot/field timer

(MP-70 only)

You must have an HS-70 hand switch to operate the shot/field timer. Fol-

low these steps to set the timer:

1. Press SET TIMER/T.O.D.

2. On the numeric keypad, enter a two-digit time and then press

ENTER.

Use the hand switch to start, stop and reset the timer. The time remaining

appears on the top line of LCD display next to the two digit sport code.

Note: These steps will change the reset time only for a

single reset event and do not change the default timer

setting held in permanent memory. To change the

default setting, refer to the sport-specific setting for the

appropriate sport. If you are using it to run a basketball

scoreboard see

“SETTING THE TIMER (MP-70 ONLY)” ON

PAGE 37.