User`s guide

MP-70/50 Scoreboard Controller User’s Guide
12
Turning on the MP-70/50
Before turning on the MP-70/50, verify that it is connected to a standard
120-volt grounded outlet.
See “IMPORTANT PRECAUTIONS” ON PAGE 8.
The controller’s ON/OFF switch is located at the rear of the console. Move
this switch to the ON position. The MP-70/50 displays the start-up mes
-
sage below. (The version number may be different from the one shown
here.)
Programming the MP-70/50
The MP-70/50 control’s system settings must be properly programmed
(configured) or it will not operate correctly! Before turning on your con
-
trol, carefully read and understand the instructions in “PROGRAMMING THE
SYSTEM SETTINGS” ON PAGE 149 and in “SELECTING AND CHANGING SPORTS” ON
PAGE 173.