User`s guide

Chapter 20: Segment Timer Operation
199
Breaks
Breaks have the same number as their corresponding segment.
When you run the MP-70/50 in Break Mode, the upper left-hand side of
the LCD screen displays the letters BRK, as shown below.
If you set the Break Time to 0:00, the MP-70/50 will ignore the break
time, and will move on to the next segment.
During the Break Time counting cycle, the Home Score digits flash. If your
scoreboard is equipped with a horn, at the conclusion of the break, the
horn sounds twice.
Exiting Segment Timer
To return to the standard Scoreboard Mode, simply press and hold down
the
2 key again and power on the control, the same way you did to enter
Segment Timer.