User`s guide

Chapter 20: Segment Timer Operation
197
Running Segment Mode
Activate the Segment Timer
To run the Segment Timer, press and hold down the 2 key and simulta-
neously turn the control on. The LCD screen will display a screen similar to
the one below.
Now that you have activated the Segment Timer, the MP-70/50 will run in
Segment Timer mode until you return it to the standard Scoreboard Timer
Mode. When you turn the MP-70/50 control on if it has been activated to
run the Segment Timer, it will display a screen similar to the one shown
below:
Segments
When you run the MP-70/50 in Segment Mode, the upper left side of the
LCD screen displays the letters SEG. On the LCD screen, an arrow points
up if the segment numbers count up, and points down if the segment
numbers count down.
Use the +3 key to reverse the direction that the segments and/or breaks
count.
Note: To return to the normal mode of operations, simply
press and hold down the
2 key again and power on the con-
trol, the same way you did to enter Segment Timer.