User`s guide

MP-70/50 Scoreboard Controller User’s Guide
194
Program Mode for Segment
Timer
To program the Segment Timer, press down the SHIFT and 2 keys
together while turning on the MP-70/50. You will see a screen display on
the LCD, similar to the one shown below.
Use the numeric keys 0-9 to enter your selected times for segments and
breaks. The first two digits signify minutes, and the remaining two digits
signify seconds. Press
ENTER to set the time and automatically advance to
the corresponding break time entry screen, an example of which is shown
below.
• To increase one numeric increment of either Break Times or Segment
Times, press
+1.
• To decrease one numeric increment of either Break Times or Segment
Times, press
-1/BLANK.
• To switch from Segment Times to Break Times (or from Break Times to
Segment Times), press
+2.
Note: If you wish to program the Segment Timer to stop at
the end of a sequence, simply enter a time of 00:00 for the
stop segment while you are in Program Mode.