User`s guide

MP-70/50 Scoreboard Controller User’s Guide
188
Saving a configuration
Before returning to normal operation you will be asked to enter a name for
the configuration you just entered. The name can be up to 16 characters
long.
1. Respond YES to QUIT. You will see a portion of the alphabet on the
top line of the LCD. The bottom line will read, ENT.CONFIG.NAME.
2. Use the 4 (back) and 6 (forward) keys to move the cursor through the
alphabet on the top line until it is under the letter you want.
3. To select a specific letter, press the 5 (next) key.
4. Continue entering letters.
5. Press ENTER when name is complete.
The MP-70/50 control will hold up to six different configurations. (See
“LOADING AN EXISTING CONFIGURATION” ON PAGE 205 to learn how to load a con-
figuration.) If all six locations are full, you will be asked if you would like to
overwrite one of the existing configurations. If you respond
YES, you can
then select the one you want to replace.
To save and use a configuration without naming it, press and hold the
SHIFT key and press CLR/ESC. The control will be set for the configura-
tion just entered, but the configuration will not be available on the recall
list.
Always reset the control for a new game after changing any of the SYSTEM
SETTINGS or CHANGE SPORT settings. Follow instructions under
“NEW
GAME” ON PAGE 22.