User`s guide

MP-70/50 Scoreboard Controller User’s Guide

Important Precautions

• Read this manual thoroughly before setting up or operating the MP-

70/50.

• Do not drop the MP-70/50

• Avoid exposing the MP-70/50 to liquids or moisture.

• Be sure the power cord is protected from hot surfaces, sharp edges

and anything else that could damage it.

• For your safety, the MP-70/50 features a three-pronged, grounded

power cord. Connect this cord only to a standard 120-volt grounded

outlet. If a 120-volt grounded outlet for a three-pronged plug is

unavailable, have one installed by a qualified electrician.

• Unplug the MP-70/50 when it is not in use. To unplug it, grasp the

plug at the outlet; do not pull on the cord.

• The MP-70/50 contains no user-serviceable parts. To avoid personal

injury or damage to the MP-70/50’s components, do not disassemble

the controller. Refer any repairs to a qualified technician.

• When an extension cord is necessary, use only a three-pronged cord

with grounded, polarized connectors. Avoid placing the cord where

someone may trip over it or unplug it accidentally.

• Do not expose the MP-70/50 to direct sunlight or extreme tempera-

tures for extended periods.

• The MP-70/50 is not meant to operate in complete darkness. You will

need to have some ambient light to see the LCD screen.

Note: Power cord references throughout this manual

are not applicable to battery models unless the charger

adaptor is connector.