User`s guide

MP-70/50 Scoreboard Controller User’s Guide
158
Wireless system settings
The following three prompts will only appear if your control has the wire-
less option. See “BATTERY OPTION” ON PAGE 165 for more information on these
settings.
HIPOWER XMIT: Responding with YES will send the radio transmission
at full power. Otherwise
NO will send radio data at a reduced power rate.
Respond
YES at this prompt.
ALL SCBDS: Responding with YES will put the radio transmitter in ALL
SCOREBOARDS mode.
NO will put the transmitter in SELect mode.
SEL CHANNEL: Respond with one or two-digit Select channel number.
Valid entries are 0 to 15. Conclude by pressing the
ENTER key. This num-
ber represents the radio channel number. See “BATTERY OPTION” ON PAGE 165
for a detailed explanation.
Exiting system settings
Respond YES to the prompt above to exit SYSTEM SETTINGS. Press NO
to start over at the SCBD TYPE prompt.