User`s guide

MP-70/50 Scoreboard Controller User’s Guide
152
System settings for Baseball
The following two-page section describes features found on Baseball
scoreboards 31, 33, 34 and 39. If you do not have these scoreboards, skip
to
“MP-70 AND MP-69 DATA OUTPUTS” ON PAGE 155.
Settings for baseball board type 31
If board type 31 has been entered, the prompts shown below appear next
in the programming sequence. You will need to know your scoreboard’s
model number to answer the following questions correctly.
•Press YES at the 4 DIGIT CLOCK prompt only if you have an MP-7200
scoreboard.
•Press YES at the AT-BAT prompt only if you have a BA-7200AB score-
board, so that the AT-BAT prompt will appear on your scoreboard.
•Press NO at both prompts if you have a BA-7200T scoreboard, which
does not allow for a 4-digit clock or an AT-BAT indicator. If you press
NO, the control will default to showing the two-digit clock instead of
AT-BAT.
Note: You may only have the ability to select one of the options
below, depending upon your scoreboard’s model number.