User`s guide

MP-70/50 Scoreboard Controller User’s Guide
150
Programming Sequence
Initial control programming needs to be performed in the following
sequence:
1. SYSTEM SETTINGS programming. Follow instructions on the following
pages.
2. CHANGE SPORT programming. Follow instructions under “SELECTING
AND CHANGING SPORTS” ON PAGE 173.
Adjusting System Settings
Follow these steps to adjust the system settings:
1. Turn off the MP-70/50.
2. Press and hold the zero key while turning on the MP-70/50.
Note: If the SYSTEM SETTINGS are incorrect, prompts in
CHANGE SPORT may not correlate to the scoreboard model
you are trying to operate and unexpected or undesired con
-
trol or scoreboard behavior could result.
Note: Your control may already be programmed with
a preset configuration. See
“LOADING AN EXISTING CON-
FIGURATION” ON PAGE 205 to load an existing configura-
tion.
Note: Always reset the control for a new game after
changing any of the SYSTEM SETTINGS or CHANGE
SPORT settings. Follow instructions under
“NEW GAME”
ON PAGE 22.