User`s guide

Chapter 15: Wireless
143
• An alternative method would be to set the two scoreboards and one
control of court 1 all to the same channel and transmit wireless data in
the SEL mode. Once you have established the SEL mode wireless link
on that court, you can then establish a link in the ALL SCBDS mode on
court 2. (See illustration below). Again, this arrangement will require
you to switch one of the court 1 scoreboards to a different channel, if
you ever want to operate all four scoreboards independently with four
wireless controls. The drawback of this setup is that if control A ceases
transmitting, the scoreboards that control was operating could even
-
tually lock on to the signal from control B.