User`s guide

Chapter 15: Wireless
137
Mixing wireless and conventional cable
hookups
To use conventional control wire with a scoreboard, first disconnect the
wireless receiver from the lamp driver card. Conversely, before using a
wireless link, disconnect the conventional control wire from the lamp
driver card. On indoor scoreboards, lamp driver and radio receiver cards
are both located behind the scoreboard HOME SCORE window or shot
timer SECONDS window. On outdoor scoreboards, the lamp driver and
radio receiver cards are located behind a service access door adjacent to
the disk antenna. Attempting to simultaneously connect conventional
control wire and a wireless receiver card to a lamp driver card can damage
both cards. The three illustrations below display correct vs. incorrect wire
-
less/conventional cable arrangements.