User`s guide

Chapter 15: Wireless
133
5. At the last prompt, the settings that you have selected will display on
the LCD screen. In the example below, the user has selected High
-
power Transmit, and has selected Channel 0.
6. Remember - You can always review your wireless settings by pressing
the
SHIFT + BAT/RF keys. Your current wireless settings will then
appear on the LCD screen, similar to the example below.
Note: The SEL.CHANNEL_0 prompt appears even in ALL
SCOREBOARDS mode. This way, a viable channel num
-
ber will be used if the control is changed to SEL channel
operation.