User`s guide

Chapter 15: Wireless
127
Changing your settings
High power transmit
To change any or all of these three settings, hold down the SHIFT key and
press the number
9 key. The top line of the LCD will display HIPOWER
XMIT? Y/N.
•If you respond YES, the radio transmitter will send the radio signal at
full power.
•If you respond NO, then the control transmit range will decrease (this
is typically used for testing).
All scoreboards
The prompt ALL SCBDS? Y/N will appear next. If you respond YES, the
radio transmitter will switch to ALL SCOREBOARDS mode. If your response
is
NO, the transmitter will switch to SEL mode.
Select channel
The final prompt in this series will be SEL.CHANNEL_0. At this prompt,
you need to select your channel. Enter a one or two-digit number for the
desired channel. Press
ENTER.
More information on selecting channels is included in the following sec-
tion.
Note: If you want the ALL SCBDS feature to be dis-
abled, a lockout jumper (Fair-Play part number C1452)
is available for purchase and installation in indoor
scoreboards. All outdoor scoreboards come with this
jumper factory installed. If you want to activate the ALL
SCBDS feature in your outdoor scoreboard, you will
need to have this jumper removed. Consult your Trans-
Lux/Fair-Play Help Desk for assistance.