User`s guide

MP-70/50 Scoreboard Controller User’s Guide
126
High and low power modes
The wireless data link can operate in either
• HIGH POWER mode - In HIGH POWER mode, your control broadcasts
a signal to the display at its maximum available power output. Under
normal circumstances, set your control to HIGH POWER mode.
• LOW POWER TRANSMISSION mode - Primarily used for system test-
ing.
Viewing your settings
To view the current radio transmitter setting of your control, hold down
the
SHIFT key while pressing the BAT/RF key.
If your control is not battery operated, the first press will display the radio
transmitter settings.
When displaying the radio transmitter settings, the bottom line of the LCD
will look something like this picture shown below:
• LOW or HIGH: LOW or HIGH POWER TRANSMISSION modes.
• ALL or SEL: ALL or SEL CHANNEL mode.
• CH# (0-15): Radio channel (SEL CHANNEL mode only).
Note: If you have a battery-powered control, the first
press of the BAT/RF key will display the percentage of
power remaining in the battery on the bottom line of
the LCD. Press the key a second time to display the
radio transmitter settings.