User`s guide

123
15
The wireless option available with the MP-70/50 allows you to control
most indoor scoreboards and shot clocks, or most outdoor scoreboards
and field timers from any location in the gym or on the field - without the
need for wiring and cable conduit.
The wireless MP-70/50 controls are operated in a similar fashion to the
MP-70/50 controls that have a standard cable connection. This chapter
describes how the wireless control can be set up and its features pro
-
grammed into the control, in the event that you may need to do this. It
also features tips on operating the wireless control effectively, as well as
detailed instructions for how to set up and run the control during special
circumstances.
When equipped with the wireless option, the MP-70/50 can still operate
the scoreboards using conventional control wire. It can also simultaneously
operate some devices via the wireless link, and others via control cables.
However, if you are using hand switches, you should know that they
require a cable connection to the control, even when used with a wireless
model.
Note: The MP-70/50 control has been factory tested
with your display, and should be ready to plug and
play.
Note: Hand switches cannot be used with the MP-50
control.
Wireless
Option