User`s guide

Chapter 14: Team Names
121
3. To select the first letter of the team name, use the 4/YES or 6/NO
keys to position the cursor under the required letter. Then press the
NEXT key. The selected letter will be displayed on the bottom line of
the LCD. Continue this process until the remaining letters of the team
name have been chosen. The
CLR key of the numeric keypad provides
backspace capability. Press it to delete any letter or letters selected in
error. Various stages of team name construction are illustrated below.
4. Once all the required letters have been chosen, press the ENTER key
to conclude the process and transmit the team name data to the
scoreboard display. A screen similar to the one shown below will
appear on the LCD.
5. To enter visitor team name, repeat steps one through four only select
VISITOR SCORE instead of HOME SCORE while holding down on the
SHIFT key.
6. Once the HOME TEAM name has been entered, it will remain set in
the controller memory even when power is turned off. If you need to
change the HOME TEAM name, repeat steps one through four. The
VISITOR TEAM name is automatically erased when the control is
turned off and will need to be re-entered every time the control is
used.