User`s guide
Chapter 11: Baseball
105
Tracking errors
Press ENTER to turn the error indicator on or off. With some scoreboard
types, the prompt at left appears when you turn the error indicator on.
Enter the position number of the player committing the error; then press
ENTER.
If your scoreboard type allows you tally errors for each team follow these
steps:
1. Press HOME ERRORS or VISITOR ERRORS.
2. Press one of the following keys to adjust the error count by the incre-
ment indicated +1, +2, +3 or -1.
Or
1. Press HOME ERRORS or VISITOR ERRORS.
2. On the numeric keypad, enter the new error count and then press
ENTER.
Reading baseball scoreboard clocks
On baseball scoreboards there are two types of clock available.
1. Standard four-digit clock is programmable for display of either min-
utes/seconds or hours/minutes. Cadence of seconds or minutes indi-
cates which mode this clock is in.
2. Two-digit “jump” clock with colons on either sides of digits.
Right-colon lit: Minutes are displayed
Left-colon lit: Seconds are displayed
In HOUR CLOCK mode only:
Both colons lit: Hours are displayed until last hour when right colon is
lit to indicate minutes.
Note: Some two-digit models are capable of displaying the
inning number on the clock. If this feature is activated, nei
-
ther colon will be lit while the inning number is displayed.