Instruction manual

5 - 1
5. Installation Method
[1] Installation of IV-08MP
Secure the IV-08MP using four (4) mounting holes of the main housing angle brackets (four (4):
provided with the equipment).
Cut out the panel (
228.0
+0.5
0
×
186.0
+0.5
0
mm) of the mounting surface (thickness: max.7 mm) to fit the
IV-08MP into the surface.
(When mounting the main unit only)
Mounting surface
IV-08MP
Max. 7 mm
Mounting holes of the main
housing angle brackets (total 4
locations including the lower part)
200.0mm
186 mm
+0.5
0
186 mm
+0.5
0
242.0mm
228 mm
+0.5
0
228 mm
+0.5
0