User Manual

ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
РУССКИЙ
ENGLISH
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please
read this manual carefully before using Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future reference.
E-1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
..................
E-2
• WARNING
............................................................................
E-2
• CAUTIONS CONCERNING OPERATION
...........................
E-2
• INSTALLATION GUIDELINES
.............................................
E-2
PARTS NAME
.........................................................
E-3
• CONTROL PANEL
...............................................................
E-3
• FIX THE OPERATION COVER BY SCREW
.......................
E-3
INSTALLATION POSITION
.............................................
E-4
ACCESSORIES
..................................................................
E-4
HOW TO INSTALL THE UNIT
........................................
E-5
OPERATION
.......................................................................
E-6
CLEANING AND MAINTENANCE
.................................
E-7
• MAIN UNIT
...........................................................................
E-7
• FILTER
.................................................................................
E-7
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
...
E-8
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
...
E-9
SPECIFICATIONS
...........................................................
E-11
TROUBLESHOOTING
....................................................
E-12
• While IG-A20E and IG-A40E can inactivate suspended viruses and
other contaminants, it cannot create a completely sterile environ-
ment. SHARP does not guarantee its ability to prevent microbial in-
fection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-A20E and IG-A40E
have to be replaced periodically*.
* Replacement is required approximately every 2 years (17,500 hours) when operated
24 hours a day. IG-A20E and IG-A40E will stop operating after about 26 months
(19,000 hours) if the Plasmacluster Ion Generating Unit is not replaced.
IG-A20EA40E.en.indd3IG-A20EA40E.en.indd3 2009/09/1713:39:032009/09/1713:39:03