User Manual

05/6/7 HT-X15H(H)E6.fm
E-55
ENGLISH
TINSZA064SJZZ
HT-X15H
Advanced Features
Changing the default setting of the amplifier
Change settings according to the connected speakers.
Speaker delay setting (See page 56.)
Speaker level setting (See page 57.)
Test tone (See page 57.)
Example:
If the right surround speaker is 3.3 m (10 feet) away from the listen-
ing position, change settings as shown below (adjust the SR).
Default settings:
Delay - - - 2 m (6 feet)
Level - - - 0 dB (FL, CT, FR, SR, SL), + 5 dB (SW)
1 In "Speaker delay setting", set the right surround speaker (SR)
to 3.3 m (10 feet).
2 In "Speaker level setting", slightly increase the level of the right
surround speaker as it is a little farther than others (see page
57).
3 In "Test tone", check the sound from each speaker (see page
57).
FL
FR
SL
Default setting: 2 m (6 feet)
SR
SW
CT
FL
FR
SL
SR
SW
CT
3.3 m
(10 feet)
Speaker type Delay range Level range
FL Front speaker (Left) 0.1 to 9.0 m - 6 dB to + 6 dB
CT Centre speaker 0.1 to 9.0 m - 6 dB to + 6 dB
FR Front speaker (Right) 0.1 to 9.0 m - 6 dB to + 6 dB
SR Surround speaker (Right) 0.1 to 9.0 m - 6 dB to + 6 dB
SL Surround speaker (Left) 0.1 to 9.0 m - 6 dB to + 6 dB
SW Subwoofer/amplifier unit - 10 dB to + 10 dB
If you press during
the operation, you
can go back one step.