Specifications

Placing the system
Installation image:
TV
i
BD Player DVD player
Place the system as shown.
Remove the protective film covering the sound bar and
subwoofer before using the system.
Notes:
• As the sound from the system is omni-directional, you
can place the speaker anywhere you like. However, it is
recommended to place it as close to the TV as possible.
• The front panel of the speaker is not removable.
Caution:
Do not change the installation direction when the unit is
turned on.
Place the stand as shown.
System connections
I Make sure to unplug the AC power lead before making any connections. ]
Subwoofer Right Left
Sound Bar
Wallsocket
AC 220-240 V
50/60 Hz
Connect the wire without insulation tube to the minus (-)
terminal, and the wire with red and white insulation tube to
the plus (+) terminal.
Caution:
• Use speaker with an impedance of 3 ohms or more, as
lower impedance speaker can damage the unit.
Red
• Do not make a mistake when
connecting the right and left
speakers. The right speaker is
the one on the right side when
you face the unit.
• Do not let the bare speaker
wires touch each other.
• Do not allow any objects to fall
into or to be placed in the bass
reflex duct.
SP_E_S
INCORRECT
Do not stand or sit on the subwoofer/sound bar. You
may be injured.
D_ nlo_ded _:_om www.Manualslib.com mare als se{_ch engine
E-7