ENGLISH MODEL HT-SB60 SOUND BAR HOME THEATER SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. HT-SB60 Sound Bar Home Theater system consisting of HT-SB60 (sound bar system) and CP-SW60 (active subwoofer system). 3D AUDIO TREBLE BASS Note: This product is recommended for flat panel TV (LED, LCD and plasma).
Special Notes FCC Radiation Exposure Statement This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be co-located or operating in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Important Safety Instructions Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
Precautions ● In case of an electrical storm, unplug the unit for safety. ● Hold the AC power plug by the head when removing it General ● Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment. 4" (10 cm) 4" (10 cm) 4" (10 cm) from the AC outlet, as pulling the cord can damage internal wires.
Controls and indicators (continued) Display 1 Subwoofer FRONT VIEW 2 DIGITAL REAR VIEW 1 3 3 DIGITAL 2 Reference Page 1. Dolby Digital Indicator . . . . . . . . . . . . . . . . . . . . . 13 2. DTS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. Muting Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4 PAIRING AC INPUT 5 Reference page 1. Power/Pairing Indicator. . . . . . . . . . . . . . . . . . . . 11 2. Bass Reflect Duct 3. Woofer 4. Pairing button .
Controls and indicators (continued) Remote Control 1 Reference page 1. Remote Control Transmitter. . . . . . . . . . . . . . . . 11 2. TV ARC Button. . . . . . . . . . . . . . . . . . . . . . . . . 9, 13 3. Music (Sound Mode) Button. . . . . . . . . . . . . . . . 12 4. Cinema (Sound Mode) Button . . . . . . . . . . . . . . 12 5. Sport (Sound Mode) Button . . . . . . . . . . . . . . . . 12 6. BYPASS Button . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7. 3D AUDIO Button. . . . . . . . . . . . . .
Sound bar preparation To mount the sound bar on the wall 4 Screw the wall mount angle to the wall as shown in Caution: ● Be very careful to prevent the sound bar [7.92 lbs. (3.6 kg)] from falling when mounting on the wall. ● Before mounting, check the wall strength. (Do not put on the veneer plaster or whitewashed wall. The sound bar may fall.) If unsure, consult a qualified service technician. ● Mounting screws are not supplied. Use appropriate ones. ● Check all wall mount angle screws for looseness.
Placing the system Notes: Installation image: ● As the sound from the system is omni-directional, you can place the sound bar anywhere you like. However, it is recommended to place it as close to the TV as possible. ● The front panel of the sound bar is not removable. TV Caution: ● Do not change the installation direction when the sound bar is turned on. ● Do not stand or sit on the sound bar and subwoofer as you may be injured. Placing the stand Place the stand as shown.
System connections (continued) HDMI Connection Caution: Turn off all other equipment before making this connection. The illustration below shows the flows of the signals. Audio and Video signal TV DVD/Blu-ray Digital tuner 1. Method 1 This connection is for HDMI TV with ARC (Audio Return Channel). TV DVD, Blu-ray disc player or similar To HDMI output terminal To HDMI (TV ARC) input terminal To HDMI OUT (TV ARC) output terminal Sound Bar To HDMI input terminal 2.
Audio connections to TVs, DVD players, VCRs, etc. Other connection (without HDMI) The illustration below shows the flows of audio and video signals. Audio signal Video signal TV DVD/Blu-ray Disc Player Digital tuner, etc. Notes: ● Refer to the operation manual of the equipment to be connected. ● Fully insert the plugs to avoid fuzzy pictures or noises. ● Connecting via this method may disable TV internal speakers.
Remote control General control Battery installation Use 1 “AA” size battery (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. AUDIO 1 Open the battery cover. 2 Insert the batteries according to the direction indicated in the battery compartment. When inserting or removing the battery, push them toward the battery terminals. 3 Close the battery cover. Make sure to enable the HDMI CEC when making HDMI connection. For details, refer to the operation manual of the TV.
General control (continued) ● When pairing is successful: Muting On sound bar: “PAIRING” disappears. On subwoofer: indicator turns blue. The volume is muted temporarily when pressing the (MUTE) button on the remote control. Press again to restore the volume. Note: When the sound bar is turned off and back on again, muting is canceled. Subwoofer Sound Bar Sound Mode PAIRING Notes: ● If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.
General control (continued) General control (continued) Press the 3D AUDIO button repeatedly to select: AV SYNC level control The AV SYNC level can be adjusted. To increase the level, press the AV SYNC + button. 3D AUDIO 1 : Sound effect that emphasizes 3D sound. 0 +1 ..... +3 3D AUDIO 2 : Sound effect that maintains the 3D sound and improve vocal clarity. To decrease the level, press the AV SYNC – button.
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. Symptom ● Wireless connection cannot be established. General Symptom ● No sound is heard. Possible cause ● ● ● The sound from subwoofer is not well balanced. ● Power turns off suddenly.
Specifications Maintenance Cleaning the cabinet Periodically wipe the cabinet with a soft cloth. Caution: ● Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet finish. ● Do not apply oil to the inside of each component. It may cause malfunctions. As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice.
